INTRODUCTION
Portable unmanned aerial vehicle countermeasures interfere with the communication link of unmanned aerial vehicles by emitting specific frequency bands of electromagnetic waves, forcing them to lose control, lose images or navigation guidance, triggering protective mechanisms such as hovering, landing, or returning, thereby achieving effective control of "black flying" unmanned aerial vehicles.
Technical parameters
Size of touch screen |
3.5 inches |
Interference frequency band |
900MHz/1.5GHz/2.4GHz/5.8GHz |
Interference distance |
1.5km |
Interference power |
20W/ Single frequency band |
Interference mode |
Drive away/forced landing Custom frequency band touch selection |
Weight |
3Kg |
Protection grade |
≥IP54 |
Battery |
Built-in detachable lithium battery 28V/6000mAh Support external USB 5V power supply |
u Battery charging and discharging operation
Connect one end of the device charging cable to the battery charging port, and plug in the power supply at the other end to charge the device battery.After the USB cable is connected to the discharge port, it can interfere with the device battery and charge the external device.
u SET OPERATION
Click the settings button in the upper right corner of the interface to enter the settings interface. Manually click on the brightness adjustment switch to adjust the screen brightness.
Our hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)